Ultimate SaleSpindle-Kit Water-Pump Water-Cooling-Spindle ER20 80mm 75w New-Arrival

Spindle-Kit Water-Pump Water-Cooling-Spindle ER20 80mm 75w New-Arrival

Hot Deals 35% Discountfor Ultimate SaleSpindle-Kit Water-Pump Water-Cooling-Spindle ER20 80mm 75w New-Arrival, superior quality assurance from established manufacturer.

€ 191,08 - 267,87
(based on 154 user reviews)
Producer: MaJack
Identifier: 32985816072
Volume Retail Sales: MaJack piece
Availability: 727 pieces
Last Update : Sun, 24 Jan 2021
Product Details

    Ultimate SaleSpindle-Kit Water-Pump Water-Cooling-Spindle ER20 80mm 75w New-Arrival Specification & Description Summary

    Ultimate SaleSpindle-Kit Water-Pump Water-Cooling-Spindle ER20 80mm 75w New-Arrival Specification

    • Brand NameG-PENNY MACHINE
    • OriginCN(Origin)
    • Operating Speed0-24000rpm
    • DriveMOTOR

    2.2kw-主2_012.2kw-主2_021 & 220v 2.2kw ER20 4 bearings water cooled spindle

    1 & 220v 2.2kw inverter/VFD 

    (The inverter should be set up before connecting to the spindle, it needs to be set to 400Hz)

    1 & 80mm spindle clamp/bracket

    1 & 75w water pump & 5m water pipes

    1 kit ER20 high accuracy collet (0.008mm) --- 4,6,8,10,12,1/2,1/4,1/8 (As gift)

    2.2kw-主2_04Good News! Now order the 2.2kw ER20 water cooled spindle kit, you can get 1 kit ER20 high accuracy collet as gift (Precision≤0.008)


    • Size: 80x230mm (Middle body diameter:80mmxLength:230mm)

    • Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

    • Cooling: Water cooling

    • Power Interface: Optional H20-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground.

    • Power: 2.2kw

    • Voltage: 220v

    • Current: 10A

    • Frequency: 0-400Hz

    • Speed: 0-24000rpm

    • Runout Off: Less than 0.01mm

    • Diameter(mm): 80

    • Bearing Type: 2 x 7005 P4 DT & 2 x 7002 P4 DT

    • 4pcs fully sealed angular contact bearings

    • Collet: ER20

    • Clip Knife Diameter: 13mm,12mm,12.7mm,11mm,10mm,9mm,8mm,7mm, 6.35mm,6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)

    • Water Cooling ER20 collet chunk

    • Grease Lubrication

    • Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working.


    • P4 fully sealed angular contact bearings ,2×7005C P4 DT &2×7002C P4 DT,increase spindle life .(We also have 4 pcs ceramic ball bearings type spindle)

    • Longer length make the torque bigger,more powerful.

    • Carefull assembly make the spindle more precisional.

    • Precision 0.01mm.Coaxial degree less than 0.0025mm.

    • We are the spindle manufacturer,we offer only best quality and best price to you.



    • 1. Our Ceramic ball bearings spindle use 4 pcs ceramic ball bearings.

    • 2. Ceramic ball bearings are resistant to high temperatures and low heat , usually 3-5 degrees lower than steel ball bearings during using .

    • 3. Ceramic ball bearings have low friction, low noise and long service life.

    • 4. If you want to use the spindle for aluminum, hard wood, then ceramic ball bearings better than steel ball bearings.



    • Power: 2.2kw

    • Input Voltage: 220v

    • Input Phase: 1

    • Input Frequency: 50/60Hz

    • Output Voltage: 220v

    • Output Phase: 3

    • Output Current: 10A

    • Output Frequency: 400Hz

    • Control Method: V/F control; Open-loop flux vector control

    • (The inverter should be set up before connecting to the spindle, it needs to be set to 400Hz)

    2.2kw-主2_182.2kw-主2_191. PID control;advanced calculous PID closed-loop arithmetic.quick responding speed and high suitability.

    2. 2.Easy PLC function can realize 16 legs of speed and inverter control function.

    3. 3.Rs485 communication can realize 16 legs of speed and inverter control function.

    4. 4.With extremely strong anti-jamming capability。

    5. Low output ratting torque 0.5HZ-150%,low speed running ability.

    6. Carrier adjustable by 16KHZ. completely soundless working environment.

    7. Broad voltage working area,normal running in 3.4v-456v

    8. Auto voltage regulation (AVR) technique , for ensuring the inverter load capability.

    9. Various control technique by both synchronization znd non-synchronization,dynamically realize fast starting without changing brakes.

    10. With perfect error protection and short circult starting protection capability.

    11. Eead-time compensation and auto torque slip compensation function ,can realize 180% high orque output at low frequency 0.25HZ

    12. Unique EMC desige,can minimize inverter's pollution to power.

    13. Overall reinforcement layer to suit all kinds of harsh enviroment.



    DO NOT set up the inverter by yourself if you don't know how to, or it will make both the spindle and inverter burn easily.

    Please contact us, we have manuals, videos and pictures to help you.



    • Max Head: 3.2 m;

    • Power: 75w;

    • Maximum flow: 3200L / H

    • Plug Cord Length: 1.4m

    • Voltage: 220V;

    • Frequency: 50 HZ

    • Outlet size: 4 and 6 mm;

    • Dimensions: 145 * 110 * 90 mm



    • High Lift

    • Large Flow Rate

    • Highly Durable

    • Excellent Insulation

    • Can cool the machine quickly

    • Good quality and long life

    • Large inventory

    • Big strong power



    • The shell is made of high quality plastic, which is anti corrosive and high durable.

    • Pumps have excellent insulation thanks to the motor bearing completely sealed.

    • Pumps combione pumping, filtered,oxygen and fountains in one. 

    2.2kw-主2_29Must be used in the water.

    • Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.


    2.2kw-主2_312.2kw-主2_322.2kw-主2_33Diameter:   80mm

    Material: Cast Aluminium

    2.2kw-主2_35Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.



    • Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.

    • Inner wall is very smooth,  outer walls is sandblasted, relatively fine uniform,  but not very smooth.

    • Cast aluminium fixture is much heavier than aluminium profile fixture.


    2.2kw-主2_39Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.


    2.2kw-主2_412.2kw-主2_422.2kw-主2_432.2kw-主2_44Type: ER20 High accuracy collet

    • Material:65Mn Steel

    • Quantity: 8 pcs (4mm,6mm,8mm,10mm,12mm,1/4(6.35mm),1/8(3.175mm),1/2(12.7mm))

    • Precision ≤ 0.008mm

    • Hardened & Precision ground

    • Widely used in boring, milling, drilling, CNC milling machine wire tapping,engraving spindle machines,machining centers and other processing.



    • Spindle working environment temperature is usually -10 ~ 40 .
    • Before installing the first electric spindle axis head turned by hand, should feel flexible, non-blocking phenomenon.


    • Spindle in the preservation and transportation, high-speed grease inside the bearing state will change, customers should be running at low speed for 30 minutes. 3000 rpm and then follow the poor increase, run 20 minutes each. Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter.

    • Connect the inverter spindle, three-phase inverter power cord should be soldered in the plug 1 (U), 2 (V), 3 (W) feet, 4 feet for the ground. After the power is turned on, to observe whether the spindle rotation axis indicates the direction consistent. If inconsistency should be immediately shut down, replace the inverter and spindle connected two wires of three-phase power supply.

    • It should ensure that before use of water-cooled spindle, the cooling system is working properly. Every day before using the spindle must be running at low speed for 15-20 minutes. Clamping the cutters to spindle, collet nuts ,collets,cutters must be clean enough. Shank inserted into the collet must be greater than 15mm.



    • Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken.

    • AC spindle motoMUST use with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.

    • When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings.


    2.2kw-主2_611. Cooling in different ways: water-cooled spindle motor is the use of the water cycle to cool the heat generated after the high-speed rotating spindle, spindle motor with fan-cooled approach to cooling. 

    2. Noise: Water-cooled spindle motor is basically no noise, but the air-cooled spindle motor is very loud. 
    3. Life aspects: Water-cooled spindle motor pay attention to maintenance, frequently changes the water or the use of industrial water coolers, air-cooled spindle fan mainly by the wind blowing the heat transferred to the heat sink, so as to achieve the cooling effect. 
    4.If you need use for metal ,hard wood,granite,stone,you can choose metal spindle.Metal spindle much better than wood spindle. 

      2.2kw-主2_632.2kw-主2_642.2kw-主2_65Spindle from the production - assembly - test, and finally the perfect packaging .  We will 100% guarantee security to the hands of the guests. 


    2.2kw-主2_672.2kw-主2_68Shipping Cost

    Our products are sold worldwide.

    If you need many items in the same time, please contact us in advance to confirm shipping cost.



    We accept paypal credit, bank transfer, western union etc. 

    Payment must be made within 7days calendar days of the auction end time.


    Problem and Feedback:

    PLEASE DON'T leave any negative feedback before you contact us.

    We are honest and helpful supplier , we will try our best to solve problems with you.

    Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback. 

    Thanks very much in advance.



    If you are NOT SATISFIED with our package like the products is damage, please do not sign it and contact us immediately.

    If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.



    We can produce the product according to our customer's design. 

    If you need something is very special, please contact us about it.


    We are willing to help you about it.

  • follow us